Children's play structures and equipment must meet the same requirements as accessory structures. Setbacks and other requirements vary according to the size of the shed.
Type of Structure
| Size in Square Footage
| Height of Building
| Setback Requirement
| Other Requirements
|
---|
Storage Shed | 150 square feet and less | Less than 8.5 feet tall | A 3-foot rear setback requirement, 3-foot right and left setback | A copy of the survey |
Shed and Accessory Structure (not used for storage purposes only) | 150 square feet and less | Height is not a factor | A 5-foot rear setback, side setbacks are per the Zoning District and can vary between 6 feet and 20 feet | A copy of the survey |
Shed and Accessory Structure | 150 square feet and less | Taller than 8.5 foot | A 5-foot rear setback, side setbacks are per the Zoning District and can vary between 6 feet and 20 feet | A copy of the survey |
Shed and Accessory Structure | 151 to 255 square feet | N/A | 5-foot rear setback, side setbacks are per the Zoning District and can vary between 6 feet and 20 feet | A copy of the survey |
Shed and Accessory Structure | 256 square feet and larger | N/A | 5-foot rear setback, side setbacks are per the Zoning District and can vary between 6 feet and 20 feet | A copy of the survey and a copy of the building plans. This will also require a footing inspection. |
Note 1: Setbacks listed are for properties with no easements. Person obtaining permit is responsible for observing all easements such as private and public drainage easements, utility easements, maintenance easements, pedestrian access easements, etc.
Note 2: Sheds must be placed no closer than 6' to any other structure, otherwise they are considered part of that structure, and must meet the setback requirements for that structure.
Note 3: Corner and through lots (lots on more than one street) have different setback requirements. Please contact Development and Permits at 757-382-8454 for further information.
Note 4: Setbacks listed are not reflective of any overlay restrictions, such as CBPA, PUD etc. Additional requirements may apply.